Miele KF 1803 Vi Скачать руководство пользователя страница 33

Страница: 33 / 88

After cleaning

Return all shelves and accessories.

Place food back in the refrigerator
section, close the appliance doors,
insert the plug in the power outlet
and turn the appliance on.

Switch on the SuperCool function for
the freezer section. The freezer
section will cool down quickly.

Once the temperature in the freezer
section is cold enough, place food in
the freezer baskets and return them
to the freezer.

Changing the light bulb

The lighting automatically switches off
after the door has been open for
approx. 5 minutes. This is not a fault.

After the bulb has cooled for a short
time it will turn on again.

If the light does not come on when the
door is opened briefly, the light bulb
should be changed.

Use the main switch to turn the
appliance off.

To reduce the risk of electric shock,
disconnect the appliance from the
power supply by unplugging or
tripping the circuit breaker.

Upper lighting

Grasp the front of the light cover with
both hands, and slide it back.

Carefully pull the cover forward and
out.

Cleaning and care

Содержание KF 1803 Vi

























































































Результаты поиска

Содержание KF 1803 Vi

Отзывы:

Похожие инструкции для KF 1803 Vi

Бренды по названию

Популярные бренды

Miele KF 1803 Vi, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание KF 1803 Vi

Отзывы:

Похожие инструкции для KF 1803 Vi

Бренды по названию

Популярные бренды