Miele HG07-W Скачать руководство пользователя

Страница: 83 / 124

Programme options

Selecting programme options

You can use programme options to
adjust the programmes.

To do this, you can select or deselect
the programme options before running
the programme.



Switch the dishwasher on using the



sensor control.

The

Start

sensor control flashes.



Select a different programme as
required.



Touch the sensor control for the
programme option you want.

The appropriate sensor control will light
up when the programme options are
available for the selected programme.

If the programme option is not
compatible with the selected
programme, a message to this effect
will appear in the display.



In this instance, confirm the message
with



Press the

Start

sensor control to start

the programme.

The selected programme option will
remain active for that particular
programme until the setting is changed
(except for the

ECO

programme).

IntenseZone



The



IntenseZone

programme option

increases cleaning performance in the
lower basket.

Energy consumption increases due to
the extended wash duration in the lower
basket and increased temperature.

Express



The



Express

programme option

reduces the programme duration.

In order to achieve optimum cleaning
results, the temperature, and therefore
the energy consumption, will increase
with this option.

The time by which the programme
duration is shortened varies according
to the selected programme.

Selecting the



Express

programme

option may take precedence over other
selected options.

When used in combination with the

QuickPowerWash

programme, the



Express

programme option results

in a rinse designed solely for the
purpose of flushing out the chamber
to remove salt solution that leaked out
after refilling the salt reservoir.

Содержание HG07-W





























































































































Результаты поиска

Содержание HG07-W

Отзывы:

Похожие инструкции для HG07-W

Бренды по названию

Популярные бренды

Miele HG07-W, Руководство по эксплуатации

Результаты поиска

Содержание HG07-W

Отзывы:

Похожие инструкции для HG07-W

Бренды по названию

Популярные бренды