manualshive.com logo in svg

Miele HG07-W, Руководство по эксплуатации, Страница: 68 / 124

Поделиться
Скачать
Miele HG07-W Скачать руководство пользователя страница 68

Operation

68

Switching on the dishwasher

Make sure the spray arms can rotate
freely.

Close the door.

Open the stopcock, if it is closed.

Touch the 

 sensor control. 

If the dishwasher has been switched
off for longer than 1 minute, you will
need to hold the 

 sensor control for

a bit longer (wipe protection).

The programme selected will appear
briefly in the display and the
appropriate sensor control will be
illuminated. 
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds. 
Then the display will show the
estimated duration for the selected
programme.

The 

Start

 sensor control flashes.

Selecting a programme

Choose your programme according to
the type of crockery and the degree of
soiling.

The different programmes and their
uses are described under 

“Programme

overview”

.

Touch the sensor control for the
required programme.

The sensor control for the selected
programme will light up.

Further programmes can be selected
under 

.

To do so, touch the 

 sensor

control.

The first of the further programmes will
appear in the display.

Use the 



 sensor controls in the

display to select the programme you
want.

You can now select programme options
(see “Programme options”).

If any programme options are selected,
the appropriate sensor controls will also
light up.

Содержание HG07-W





























































































































Отзывы:

Нет отзывов