manualshive.com logo in svg

Miele HG07-W, Руководство по эксплуатации, Страница: 71 / 124

Поделиться
Скачать
Miele HG07-W Скачать руководство пользователя страница 71

Operation

71

Switching off the dishwasher

The dishwasher can be switched off
at any time using the 

 sensor

control.

Confirm the query 

Switch appliance off

with 

OK

.

Switching the dishwasher off during a
programme stops the programme.

You can also do this to stop an ongoing
timer.

If you have touched the 

 sensor

control, but in fact do not wish to
cancel the programme, use the

 button to select the 

Do not switch off

option on the display and confirm
with 

OK

.

Risk of damage from leaking

water.
Overflowing water can cause
damage.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.

If you open the door fully after switching
off, the dishes will cool much faster.

First unload the lower basket, then
the upper basket and finally the 3D
MultiFlex tray (if present). 
This will prevent water drops from the
upper basket and 3D MultiFlex tray
from falling onto the dishes in the
lower basket.

Содержание HG07-W





























































































































Отзывы:

Нет отзывов