Miele G 7966 Скачать руководство пользователя

Страница: 99 / 124

Frequently Asked Questions

Water intake fault

Problem

Possible cause and solution

The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
One of the following
messages appears in
the display:



Open the water supply

The water supply is turned off.



Turn on the water supply fully.



Insufficient water. Open

the water supply all the way.
Refer to Operating
Instructions if necessary

Before remedying the fault:



Switch the dishwasher off.

There is a problem with the water intake.



Turn on the water supply fully and start the
program again.



Clean the filter in the water intake (see “Cleaning
the filter in the water intake” under “Cleaning and
care”).



The water connection pressure is lower than
50 kPa.
Seek professional advice.



The on-site connection for the water drainage may
be too low and you will need to vent the water
drainage (see “Water drainage” under
“Installation”).



Fault F 18: A technical

fault has occcurred. Turn off
the appliance, close the
water supply and contact
Miele Service.

A technical fault has occurred.



Switch the dishwasher off.



Turn off the water supply.



Contact Miele Service.

The following fault
message appears
during the

EnergySaver

program:

Intake temperature too low

The intake water has not reached the required
temperature of 45°C (see “Water intake” under
“Installation”).



Start the program again.



If the fault message appears again, select a
different program.

Содержание G 7966





























































































































Результаты поиска

Содержание G 7966

Отзывы:

Похожие инструкции для G 7966

Бренды по названию

Популярные бренды

Miele G 7966, Руководство по эксплуатации

Результаты поиска

Содержание G 7966

Отзывы:

Похожие инструкции для G 7966

Бренды по названию

Популярные бренды