Miele G 7966 Скачать руководство пользователя страница 101

Страница: 101 / 124

Frequently Asked Questions

101

Fault in the AutoDos (automatic dispensing)

Problem

Possible cause and solution

The following message
appears on the display:

Insert PowerDisk or
deactivate AutoDos with
OK.

The

AutoDos

function is active but no PowerDisk has

been inserted.



Insert a PowerDisk (see “Automatic
dispensing / AutoDos” under “Detergent”).



If you do not wish to use AutoDos, deactivate the
function using

The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
The program does not
start or a program that
has already started
stops.
The following message
appears on the display:

AutoDos lid open

The AutoDos lid has not been closed properly.



Close the AutoDos lid and lock it fully (see
“Automatic dispensing / AutoDos” under
“Detergent”).



If the lid cannot be fully closed, check whether the
PowerDisk holder is lying flat (see “Inserting a
PowerDisk” under “Detergent”).



If the same fault message appears again, contact
Miele Service.

The following message
appears on the display:

PowerDisk empty.
Deactivate AutoDos with
OK.

The

AutoDos

function is active and the PowerDisk is

empty.



Replace the PowerDisk (see “Automatic
dispensing / AutoDos” under “Detergent”).
If you do not wish to use AutoDos, deactivate the
function using

The message

PowerDisk empty.
Deactivate AutoDos with
OK.

appears in the

display even though you
have inserted a new
PowerDisk.

The dishwasher was turned off when the PowerDisk
was replaced and it has therefore not recognized the
new PowerDisk.



Turn the dishwasher on before replacing the
PowerDisk (see “Automatic dispensing / AutoDos”
and “Inserting a PowerDisk” under “Detergent”).

Содержание G 7966





























































































































Результаты поиска

Содержание G 7966

Отзывы:

Похожие инструкции для G 7966

Бренды по названию

Популярные бренды

Miele G 7966, Руководство по эксплуатации

Результаты поиска

Содержание G 7966

Отзывы:

Похожие инструкции для G 7966

Бренды по названию

Популярные бренды