Miele G 7966 Скачать руководство пользователя

Страница: 87 / 124

Cleaning and care

Cleaning the AutoDos

If the

Clean AutoDos

message is

displayed, check that the fill channel
is clean, and clean it if necessary,
e.g., powder residues. This helps
keep the AutoDos working properly.

In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed.

PowerDisk holder

Fill channel for dispensing the

detergent from the PowerDisk into the
wash cabinet



Turn the AutoDos lid to



and open

it.



Remove the PowerDisk if appropriate.



Pull the PowerDisk holder upwards
by the yellow tabs and remove it.
When doing so, do not pull on the
side tab.



Use the tab (see arrow)



to release

the fill channel and pull it out



Содержание G 7966





























































































































Результаты поиска

Содержание G 7966

Отзывы:

Похожие инструкции для G 7966

Бренды по названию

Популярные бренды

Miele G 7966, Руководство по эксплуатации

Результаты поиска

Содержание G 7966

Отзывы:

Похожие инструкции для G 7966

Бренды по названию

Популярные бренды