Warnings and safety instructions
11
The water-connection pressure needs to be between 50 and
1,000 kPa.
A damaged dishwasher could be dangerous. If the dishwasher
gets damaged, turn it off at the electricity supply immediately and
contact your Miele dealer or Miele Service.
The manufacturer’s warranty will be invalidated if the appliance is
not repaired by a Miele authorized service technician.
We recommend replacing defective components with original
spare parts. If original Miele spare parts are installed correctly, Miele
ensures full compliance with safety requirements and the warranty
remains valid.
During installation, maintenance, and repair work, the dishwasher
must be disconnected from the domestic electricity supply (turn it off
and withdraw the plug from the socket).
If the power cable is damaged, it must only be replaced with a
specific cable of the same type (available from Miele Service). For
safety reasons, this must only be done by Miele Service or a service
technician authorized by Miele.
Do not sit the dishwasher on the hose. The hose needs to be free
of kinks and able to move freely after installation. Do not place the
hose or power cord next to a heat source e.g., hot water pipes. Do
not expose the hose or power cord to corrosive substances (e.g.,
chloride). Damage to the hose or power cord could cause electrical
shock or water damage.
This dishwasher is supplied with a special lamp (depending on the
model) to cope with particular conditions (e.g., in terms of
temperature, moisture, chemical resistance, abrasion resistance, and
vibration). This lamp must only be used for the purpose for which it
is intended. The lamp is not suitable for room lighting. Replacement
lamps may only be installed by a Miele authorized technician or by
Miele Service.
Содержание G 7966
Страница 5: ...Contents 5 Electrical connection 118 Sound emission testing 120 ...
Страница 122: ......
Страница 124: ...M Nr 11 859 220 00 en CA G 7966 ...