Miele G 7966, Руководство по эксплуатации

Страница: 104 / 124

Frequently Asked Questions
104
General dishwasher problems
Problem Possible cause and solution
The door will not open
when knocked. The Knock2open function has been permanently
disabled.

Switch the door opening function on again (see
“Knock2open” under “Settings”).
If the door still will not open or if there is a power
failure, the door can still be opened manually using
the door opening aid supplied (see ”Door opening
aid” under ”Initial commissioning”).
The in-operation
indicator light is
flashing quickly.
The alarm tone is
sounding.
The message
Press “OK”
to continue will appear on
the display.
The dishwasher does
not start or the
FlexiTimer stops
running.
The safe mode of the dishwasher was activated.
This takes place in the following instances:
– If you do not close the door within 4 seconds of
the last press of a sensor button at program
start.
– If the door is open for longer than 4 seconds
during a program or before the FlexiTimer start
time is reached.
 Confirm with OK and close the door within
4 seconds.
The indicator lights and
display are dark. The dishwasher has switched off automatically to
save energy.

Turn the dishwasher back on using the

sensor
button.
Detergent residue is left
in the detergent
compartment at the end
of a program. The detergent compartment was still damp when
detergent was added.

Only add the detergent when the detergent
compartment is dry.
The detergent
compartment lid cannot
be closed. Residual detergent is blocking the catch.

Remove the residual detergent.
At the end of a program
there is a film of
moisture on the inside
of the door and possibly
on the interior cabinet
walls.
This is part of the normal function of the drying
system. The moisture will dissipate after a short
while.