Miele G 7881 Скачать руководство пользователя

Страница: 39 / 76

For future servicing, be sure to document any changes made to the standard
factory settings.
Enter the information in the field(s) provided.

General information:

– Program selector positions that have no assigned function are represented by a

bar (

) in the middle of the display.

– To call up the programming level, use the 12 o'clock position

The status

E..

will appear in the display.

– Any program or dosing changes in connection with the preparation of medical

devices must be documented. In such cases, the washer-disinfector results
(cleaning and/or disinfection) will need to be re-validated.

The following instructions apply to all programming functions:

Activate the programming mode

Turn the program selector to the
12 o'clock position

Turn off the machine.

Simultaneously

press and hold the

"Display"

and "Start"

buttons,

while turning on the machine by
pressing the "ON/OFF" button.

The current program status

P..

appears

in the display. The "Fill/Drain" indicator
lights up.

Saving to memory and exiting the programming mode

Press the "Start"

button.

appears in the display.

Press the "Start"

button again.

The change will now be stored in the
memory.

Exiting the programming mode without saving

Use the "ON/OFF" button to turn off
the washer-disinfector.

The change is discarded.

Programmable functions

Содержание G 7881













































































Результаты поиска

Содержание G 7881

Отзывы:

Похожие инструкции для G 7881

Бренды по названию

Популярные бренды

Miele G 7881, Инструкция по установке и эксплуатации

Результаты поиска

Содержание G 7881

Отзывы:

Похожие инструкции для G 7881

Бренды по названию

Популярные бренды