Spring adapter for the water
connection
The spring adapter for the water
connection must be properly engaged
when a basket is inserted into the
machine. In other words, the adapter
must be 4 - 5 mm higher than the water
inlet in the machine.
If this is not the case, the adapter
needs to be adjusted as follows:
^
Loosen the locking ring
a
.
^
Move the adapter up to the proper
height
b
.
^
Tighten down the locking ring
c
.
How to adjust the upper basket
The upper basket can be adjusted
above and below the middle position
by 2 cm each.
Depending on the height selected, and
which inserts are used, items of various
heights can be arranged in the baskets.
To adjust the upper basket:
^
Pull the upper basket out as far as it
will go, lift it up off the runners and
remove.
^
Use a 7mm wrench to unscrew the
roller bearings on either side of the
basket, then reposition as desired.
Application
24