^
Close the appliance door.
Fitting the furniture door
^
A gap of 8 mm must be set between
the appliance door and the fixing
bracket
a
.
^
Push fitting aids
d
up to the height of
the furniture door: The lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see
-
on
the diagram.
^
Undo nuts
b
, and take fixing bracket
c
off together with the fitting aids.
^
Using a pencil, mark a line down the
centre of the inside of the furniture
door.
^
Using fitting aids
a
hang the fixing
bracket on the
inside side
of the
furniture door. Align the fixing bracket
centrally.
^
Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws
b
. (On cassette doors
only use 4 screws on the edges).
^
Pull the fitting aids upwards to
remove them
c
.
^
Turn them round and insert them right
into the middle slot on fixing
bracket
d
.
Building in the appliance
36
