Securing the appliance
^
Whilst counterholding the adjusting
bolts
b
with a screwdriver, tighten
nuts
a
at the top of the appliance
door.
^
Tighten all screws.
Securely screw the appliance to the
housing unit at the top and bottom:
^
Flap the plastic bracket up and
screw a second screw
a
through the
plastic bracket. Tighten both screws
and flap the plastic bracket back
down.
^
Align the cover strip
b
by sliding it
parallel to the top of the housing unit.
The cover strip must not protrude.
^
Secure the cover strip to the top of
the housing unit using the short 4 x
14 mm chip board screws
c
.
Building in the appliance
38