All electrical work should be carried
out by a suitably qualified and com-
petent person in accordance with
local and national safety regulations.
Connection should be made via a
suitable switched socket which is
easily accessible.
U.K., ZA: The appliance is supplied
with a mains cable and moulded plug
ready for connection to an a.c. single
phase 230 V 50 Hz supply. The fuse
rating is 13 amps.
AUS: The appliance is supplied with a
mains cable and moulded plug ready
for connection to an a.c. single phase
240 V 50 Hz supply. The plug rating is
10 amps.
NZ: The appliance is supplied with a
mains cable and moulded plug ready
for connection to an a.c. single phase
230 V 50 Hz supply. The plug rating is
10 amps.
Do not connect the appliance to the
mains electricity supply by an extension
lead. Extension leads do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
The appliance must not be connected
to an inverter and must not be used
with a plug adapter as these can cause
damage to the appliance’s electronic
unit.
For U.K.: For extra safety it is advisable
to install a residual current device
(RCD) with a trip current of 30 mA (in
accordance with DIN VDE 0664, VDE
0100 Section 739).
Important UK
If this machine is fitted with a
non-rewireable plug (BS 1363), the
following information applies:
If the socket outlets are not suitable for
the plug supplied with this product, it
must be cut off and an appropriate plug
fitted.
The fuse carrier and the fuse should be
removed from the old plug and dis-
posed of. The plug cut from the flexible
cord should then be disposed of and
on no account be inserted into any
socket elsewhere in the house (electric
shock hazard).
The fuse cover must be re-fitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is em-
bossed in words in the base of the plug
(as applicable to the design of the plug
fitted).
The correct fuse rating of the replace-
ment fuses that are ASTA approved to
BS 1362 should be fitted. Replacement
fuse covers may be purchased from
your local electrical supplier, or Miele
Service agent.
Electrical connection
27
