manualshive.com logo in svg

Miele F 2671 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2671 Vi Скачать руководство пользователя страница 6

Warning and Safety instructions

6

This appliance is not suitable for outdoor use.

 

This refrigeration appliance is intended exclusively for domestic

use to store deep-frozen food, to freeze fresh food, to make ice
cubes and to dispense drinking water.
Any other usage is not permitted.

 

This appliance is not suitable for storing and keeping cool

medicines, blood plasma, laboratory preparations or similar
substances or products. Incorrect use of the appliance for such
purposes may cause deterioration of the items stored. 
The appliance is also not suitable for use in areas where there is a
risk of explosion.
Miele cannot be held liable for damage resulting from incorrect or
improper use or operation of the appliance.

 

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge, unless they have been given
supervision and instruction concerning its use by a person
responsible for their safety.
They may only use the appliance unsupervised if its operation has
been clearly explained to them and they are able to use it safely and
are able to understand and recognise the possible dangers caused
by incorrect operation.

Содержание F 2671 Vi

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды