manualshive.com logo in svg

Miele F 2671 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2671 Vi Скачать руководство пользователя страница 101

Operating the Ice/Water dispenser

101

Empty and clean the ice cube
container at regular intervals, or at
least when you have not produced
any ice cubes for longer than a week
(see “Cleaning and care – Emptying
and cleaning the ice cube
container”).
This will ensure that you always have
fresh ice cubes, and the ice cubes
will not clump together.

Switching the Dispenser
unit 

 off

Turn off the tap of the water supply
approx. 3 hours before switching off
the refrigeration appliance to avoid
the build-up of mould caused by
stagnant water.

In Settings mode 

, use the 

and 

 sensors to select 

Dispenser unit

and touch 

OK

 to confirm your

selection.

Use the 

 and 

 sensors to select

Off

 and confirm your selection with

OK

.

The Ice/Water dispenser is now
switched off; the sensors in the control
panel are no longer highlighted in white.

Switching the system lock on/
off

You can use the system lock to protect
the Ice/Water dispenser from
unauthorised use, such as by children.

Touch the 

 sensor until it is

highlighted in white and a short tone
sounds.

The remaining sensors of the Ice/Water
dispenser are now locked and cannot
be selected.

To switch off the system lock, touch
the 

 sensor for approx. 3 seconds

until it is no longer highlighted in
white and a short tone sounds.

Содержание F 2671 Vi

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды