manualshive.com logo in svg

Miele F 2671 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2671 Vi Скачать руководство пользователя страница 116

Problem solving guide

116

Problems with the Ice/Water dispenser

Problem

Possible cause and remedy

The Ice/Water
dispenser cannot be
switched on.

The refrigeration appliance is not connected to the
power supply.

Check that the refrigeration appliance is
connected to the electricity supply.

The system lock of the Ice/Water dispenser is active
(the 

 sensor is highlighted in white).

Switch off the system lock (see “Operating the Ice/
Water dispenser – Switching the system lock on/
off”).

The Ice/Water
dispenser is not
immediately ready for
operation after having
been switched on.

This is not a fault. After the appliance door has been
opened and closed, it can take several seconds
until the Ice/Water dispenser is ready for operation.

No ice cubes are
dispensed.

The Ice/Water dispenser spout is blocked by clumps
of ice.

Remove the ice that has clumped together.

Empty the ice cube container at the latest if you
have not produced any ice cubes for a week (see
“Cleaning and care – Emptying and cleaning the
ice cube container”).

After the Ice/Water dispenser has been switched on,
it can take up to 24 hours until the first serving of ice
cubes is ready.

The chilled water from
the Ice/Water dispenser
does not taste good.

If you dispense chilled water again after a long period
of time, it may be stale.

In this case, pour away the first 15 glasses of
water.

Содержание F 2671 Vi

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды