Washing
20
Amount to be dispensed
Please follow the detergent manufacturer's instructions.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special
application products. Products must only be used for applications
approved by the manufacturer to avoid any material damage or the
occurrence of strong chemical reactions. Confirmation must be
sought from the detergent manufacturer that using the agent in the
washing machine will not cause damage.
Correct dosage also depends on the viscosity of the liquid agent. It
should therefore be allowed to settle to room temperature before
being used.
Commissioning the dispenser pumps
Before the liquid dispenser pumps can be used, the liquid detergent
must be drawn into the system and the amount to be dispensed set.
Continuing the programme after a "Dispensing system
fault" message
When the dispenser container is empty, the pump and the machine
switch themselves off and the washing machine indicates a lack of
liquid detergent.
Dispensing system fault
Fill dispenser 1.
Press the start button.
Fill the dispenser container.
Press the "START" button to continue the programme.
Dispenser calibration
Dispenser calibration is used to measure the throughput of individual
dispenser pumps.
To go directly to
Dispenser
calibration when
the machine is
switched off:
Press and hold multifunction button 2 and switch the machine on
with
"Power On".
Dispenser calibration
Main menu
Dispenser pump 1
Dispenser pump 2
Options:
–
Dispenser pump
1
to
13
Select
Dispenser pump 1
, for example.
Содержание PW 413 SES
Страница 73: ...73...
