Buzzer
A buzzer can be programmed for the following:
– a constant tone will sound at the end of a programme,
– a buzzer will sound at one second intervals as a fault warning, and
– 3 short beeps followed by a 2 second pause, then 3 short beeps etc will sound
as a reminder to remove a test item.
The reminder to remove a test item function has to be programmed by a Miele
service technician or an authorised and trained Miele Service Dealer.
The buzzer settings are displayed as numbers:
20
Switched off
21
At the end of a programme (factory default setting)
22
Fault indication
23
At end of a pro fault indication
24
Reminder to remove a test item
25
At the end of a pro reminder to remove a test item
26
Fault indi reminder to remove a test item
27
At the end of pro fault indi reminder to remove a test item.
Step
Display / Result
^
Press
0
until E04 appears.
E04
^
Turn the programme selector to
E
.
21
^
Press
ß
repeatedly or hold pressed in until the
required number appears in the display, e.g. 26.
26
Value set:
The buzzer will sound at the setting selected for 30 seconds.
To switch the buzzer off early:
– turn the programme selector to
f
,
– press
ß
.
– interrupt the electricity supply, e.g. open the door.
Programmable functions
41
