,
All electrical work must be
carried out by a suitably qualified
and competent person in
accordance with current local and
national safety regulations (BS 7671
in the UK).
– Connection should be made via a
fused plug and socket which is easily
accessible for servicing and
maintenance work after the machine
has been installed. An electrical
safety test must be carried out after
installation and after any servicing
work. When switched off there must
be an all-pole contact gap of at least
3 mm in the mains connection
switch.
– For extra safety it is advisable to
protect the machine with a suitable
residual current device (RCD).
Contact a qualified electrician for
advice.
– The mains connection cable may
only be replaced by an original Miele
spare part or an appropriate cable
with wire end ferrules.
– For technical data see data plate or
wiring diagram supplied.
The machine must only be operated
with the voltage, frequency and fusing
shown on the
data plate
.
This machine
is not
convertible.
The
data plate
with test certification is
on the rear of the machine and also
behind the plinth panel on the
protective plastic cover.
The
wiring diagram
is supplied with
the machine.
See also the installation diagram
supplied.
WARNING
THIS APPLIANCE
MUST BE EARTHED
Electrical connection
66
