Midway CART Fury Championship Racing, Руководство по эксплуатации

Страница: 94 / 104

T
ROUBLESHOOTING
- 6 M
IDWAY
A
MUSEMENT
G
AMES
, LLC
LINKING PROBLEM TROUBLESHOOTING
Symptom Cause Required Action
• Some Video Game
Machines (VGMs) in
group link properly,
while others do not
Improper hub
switch setting 1. Assure switches on hub are set according to Hub
Link Kit instructions. (VGMs on a network do not
require couplers. Hub has electronic crossover.)
2. Inspect hub indicator lights for link activity. See
manufacturer’s literature for diagnostics.
Wrong software
version Verify all linked VGMs use same version of software.
Error message “VERSION MISMATCH” will appear if
you try to link different versions. Contact your distribu-
tor.
Faulty wiring
(2 VGMs) 1. Insert only the supplied crossover connection
between coupled VGMs. Standard couplers
appear identical to devices supplied with games,
but do not include an internal crossover.
2. Verify each linking crossover coupler operates
properly by placing it in a working link between two
VGMs.
Faulty wiring
(3 or more VGMs) 1. Use an additional crossover connector and cable
to extend game or hub link connection. Two cross-
overs cancel each other out and results in same
problem as no link crossover.
2. Connect cables directly to hub. Do not use a
crossover coupler and hub together in single net-
work.
3. Separate communications wiring from other wir-
ing. Wires that must cross can only cross at right
angles to limit noise pickup.
CAUTION
Do not remove or install any connector when power is turned on. Installation under power will
damage the circuit boards, ROM’s or hard disk drive and void the warranty.