Midway CART Fury Championship Racing, Руководство по эксплуатации

Страница: 58 / 104

14 M
IDWAY
A
MUSEMENT
G
AMES
, LLC
C
HAPTER
3 S
ERVICE
To service Fan Assembly…
• Switch off the power to the game machine and unplug the AC line cord.
• Unlock and remove the rear door.
• Remove the perforated metal cover to expose the fan assembly and set aside.
• Unplug the fan power connector from the wiring.
• Remove the screws used to fasten a fan down and then lift fan out.
• Perform the desired repair or equipment replacement.
To service Speakers in Head Rest…
Refer to the Seat Pedestal Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the tamper resistant screws from the speaker grille.
• Remove the tamper resistant screws used to fasten the speaker plate to the seat and pull forward.
• Label and disconnect wires, including ground.
• Remove the nuts used to fasten the speaker to the plate and remove speaker(s).
• Perform desired repair or equipment replacement.
• Reinstall the speaker(s) to the speaker plate and reattach wiring, including ground. Attach the speaker
plate to the seat.
• Reinstall speaker grille and fasten in place with hardware provided.
To service Speaker in Seat Back…
Refer to the Seat Pedestal Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the tamper resistant screws used to fasten the grille to the seat and pull forward.
• Label and disconnect wires, including ground.
• Remove 4 Phillips head screws used to fasten the speaker to the seat and remove speaker.
• Perform desired repair or equipment replacement.
• Reinstall speaker and reattach wiring, including ground.
• Reinstall speaker grille and fasten in place with hardware provided.
To service the Seat Slide Assembly…
Refer to the Seat Pedestal Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Disconnect the Seat Assembly from the cabinet by removing the tamper resistant screws used to fasten
the assembly to the slide rails in the cabinet.
• Slide the Seat Assembly halfway back along the rails to expose wiring.
• Disconnect the speaker cable and slide the seat the rest of the way off the rails.
• Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting
plate assembly off the pedestal and set aside.
• Slide the seat assembly forward, and remove the two tamper resistant screws from the rear of the metal
panel on top of the pedestal assembly.
• Slide the seat assembly backward and remove the two tamper resistant screws from the front of the
metal panel.
• Lift the metal panel out of the pedestal base and turn the unit over.
• Remove the four nuts holding the metal panel to the slide assembly. Set the metal panel aside and slide
assembly is exposed.
• Perform the desired repair or equipment replacement.
• Reinstall by performing the steps in reverse and fasten in place using the hardware provided.
IMPORTANT: Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and
torque each bolt to seven to nine ft.-lbs. (0.7 to 1.0 Nm) if it was loosened (see illustration).