GRX-3080 JLR EU STANDALONE
Midtronics B.V. Hoofdveste 6 Houten NL
www.midtronics.com
21
Chapter 6: PDI / Storage
The PDI and Storage Mode is used for predelivery testing as
well as periodical testing of batteries in stored vehicles.
Before performing a diagnostic charge on a battery installed
in a vehicle, make sure all vehicle accessory loads are off, the
key is not in the ignition, and the doors are closed.
1. From the MAIN Menu, highlight the DIAGNOSTIC icon
and press the SELECT key.
2. Use the UP (
) or DOWN (
) ARROW key to select the
brand, or press the corresponding numerical key to
move the dot to the option button of your choice.
1
JAGUAR
2
LANDROVER
Press the NEXT soft key to continue.
3. Enter digit 4 and 5, and the last 6 digits of the VIN.
Press the NEXT soft key to continue.
4. Use the UP (
) or DOWN (
) ARROW key to select the
BATTERY LOCATION, or press the corresponding nu-
merical keys to move the dot to the option button of
your choice.
1
IN VEHICLE
2
OUT OF VEHICLE
Press the NEXT soft key to continue.
5. In case of IN VEHICLE, the GRX-3080 JLR needs to know
whether the battery is connected over the BMS.
1
YES
2
NO
Press the NEXT soft key to continue.
6. Use the UP (
) or DOWN (
) ARROW key to select the
BATTERY TYPE, or press the corresponding numeri-
cal keys to move the dot to the option button of your
choice.
1
AGM
2
REGULAR/FLOODED
Press the NEXT soft key to continue.
7. Use the UP (
) or DOWN (
) ARROW key to select the
RATING UNIT (TEST STANDARD), or press the corre-
sponding numerical keys to move the dot to the option
button of your choice.
1
EN
2
CCA/SAE
3
DIN
4
JIS
If you select JIS, the analyzer will ask for the JIS part
number. Scroll to the part number or type in the JIS part
number with the alphanumeric keypad.
Press the NEXT soft key to continue.
Battery Standards
Rating
System
Description
Range
EN
Europa-Norm
100 to 1700
DIN
Deutsche Industrie-Norm
100 to 1000
JIS
Japanese Industrial Standard:
embossed on the battery as a
combination of numbers and letters
74 numbers
from 26A17
to 245H52
SAE
Cold Cranking Amps (specified by
SAE): The amount of current a battery
can provide at 0 ºF
(–17.8 ºC).
100 to 1700
Ah
Amp Hour: A measure of reserve
capacity. This is not a battery
standard
1 to 300 Ah
8. Press the UP (
) or DOWN (
) ARROW key, or use the
numeric keys to enter the BATTERY RATING in CCA.
500
A(EN)
Press the NEXT soft key to continue.
9. Press the UP (
) or DOWN (
) ARROW key, or use the
numeric keys to enter the BATTERY RATING in Ah.
?
AH
Press
NEXT after entering the rating.
The GRX Battery Diagnostic Station will proceed with the
charging modes.
Chapter 6: PDI / Storage
