GR8-1200 OEM
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
10
Chapter 1: Before You Begin
Convention
Description
!
The safety symbol indicates instructions for avoiding hazardous conditions and personal injury.
CAUTION
The word
CAUTION
indicates instructions for avoiding equipment damage.
The wrench symbol indicates procedural notes and helpful information.
UP ARROW
The text for keypad buttons are in
Bold
capital letters.
CAPITAL LETTERS
The text for screen options are in regular capital letters.
BACK ARROW
The text for soft keys are in
Bold
capital letters.
Conventions Used in This Manual
To help you learn how to use your GR8, the manual uses these symbols and typographical conventions:
Table 2: Symbols And Typographical Conventions
Assembling the GR8
The GR8 is shipped with the control module and mounting
bracket pack
ed separately. Fo
r easy assembly, follow these
steps:
Attaching the Control Module
1. The hardware to attach the control module’s mounting
bracket to the GR8 is installed on the top of the charger.
There are three bolts with one fl at washer, one lock wash-
er, and one hex nut per bolt. Remove the washers and hex
nuts, and set them aside.
One of three
pre-installed
bolts for the
control module
mounting
bracket.
2.
Center the three holes in mounting bracket over the bolts,
and lower the bracket onto the charger. Reinstall the hard-
ware in this order: the fl at washer fi rst, the lock washer
next, and the hex nut last. Tighten the nuts securely.
One of four pre-installed bolts
on the bracket for mounting the
control module.
