GR8-1200 OEM
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
42
Chapter 13: Cable Drop Test
Midtronics Inc. 7000 Monroe Street Willowbrook, IL 60527
www.midtronics.com
Other Circuit
This test enables you to measure voltage drop across other
components.
1. SELECT CIRCUIT: Use the
U
P/
DOWN
ARROW
S
or the nu-
merical keypad to select the OTHER.
1
BATTERY GROUND
2
STARTER CIRCUIT
3
ALT CIRCUIT
4
OTHER
Press the
NE
X
T
soft key to continue.
2. SET AMPS: Use the
U
P/
DOWN
ARROW
S
or the keypad to
select the rated amperage of the circuit you are testing.
The default is 10 A.
Press the
NE
X
T
soft key to continue.
3. Connect the positive (+) clamp of the battery test leads to
the component’s positive terminal (+). Connect the nega-
tive (–) clamp to the component’s negative (–) terminal.
4. Connect the positive (+) DMM clamp to the battery’s posi-
tive (+) post. Connect the negative clamp (–) to the bat-
tery’s (–) negative post.
For the next few seconds the GR8 will display the word TESTING
and a stopwatch while it evaluates the battery ground.
Other Circuit Test Results
If there is a problem, the decision is CLEAN AND RETEST OR
REPLACE. To print the results, select the
P
RINT
soft key. To
return to the Main Menu, press the
END
key.
