10
11
midstreamlighting.com call +44 (0) 207 584 8310
MODUS R 1000 INSTALLATION GUIDANCE
7a. Floodlight connection with an IP68 connector
Inserting the terminal into the socket
Rotate the 3-pole terminal into the shown position to insert into the socket. Then push and rotate counterclockwise
until you hear a click. The click means the terminal is properly locked into the socket.
Stripping the cable
Insert the cable through the connector housing.
The socket has L, N, earth symbols. Match as follows:
Live
BROWN wire
Neutral
BLUE wire
Earth symbol
YELLOW/GREEN wire.
Insert the exposed wires in the plug and tighten each
screw.
Pull the wires to check if they are well tightened
SCALE 2:1
XSEC0001-XSEC0001
SECTION
7a. Floodlight connection with an IP68 connector
Inserting the cable with plug connector into the floodlight junction box
To connect the accessory provided (cable + plug connector) to the junction box, remove the junction box cover and
the junction box lid. Untighten the cable gland with the plastic cap and remove it.
Tighten the nut
Tighten the plastic nut with a 24 mm wrench key.
CH 24 mm
Nm 2.5÷4
