14
Power Up:
Enables a short beep sequence that takes place immediately after power-up.
Error:
This beep will be triggered by any input event which is not programmed. For example, if a long press on
the Mode Input is not assigned to a function, it will generate an error beep if a long press is sensed.
Mode:
When using a switch to enable/disable the SVR, a medium tone followed by a high tone will sound
indicating repeat mode is enabled. When pressed again a medium tone followed by a low tone will sound
indicating repeat mode is disabled.
Go Ahead:
Not currently used.
Wake Up Beep:
Enables a short beep to be sent over the air immediately after PTT is pressed. Enabling this
beep is recommended when the 'Wake on VOX' feature is used. This may also be used to get the attention of the
party receiving a call.
Courtesy Beep:
If selected, once the unit is done retransmitting the recorded audio it will generate a courtesy
tone to let others know it is done retransmitting.
Voice Compression:
If checked the SVR-1 can store up to a 3-minute voice message. If unchecked the SVR-1
can store up to a 2.25 minute voice message, but with a higher level of audio quality.
