8
LTR Programming:
1. In the LS Trunking Personality window, check the Option Board Feature box for each personality. Check the
Option Board Feature
box for all channels if using a button to control the repeat mode. If doing repeat on a
per channel basis, then check Option Board Feature only for repeat enabled channels. Additionally the unit
should be programmed to Power Up in Store/Retransmit Mode.
The following step applies to the accessory connector and may be skipped by most users.
1. An accessory pin may be used to control the repeat enable/disable. This is useful in remote control
applications. To enable this feature, one of the radio accessory pins must be assigned to
Option Board 1
(Input)
via the CPS programmer. The MPS also needs to be configured to use this mode input (see page 17).
