21
OPERATION
Mode Selection:
Mode selection means a method of turning the simplex repeater on and off. In the SVR-1-
MPM1 series there are two ways of doing this:
Per-Channel Repeat On/Off:
To use this feature each channel that is designated as a repeat channel should
have the Option Board Feature box enabled in the radio programming software. Channels that are designated as
non-repeat should NOT have the Option Board feature box enabled. Additionally the MPS software should be set
to Power Up in Store/Retransmit Mode. When using Per-Channel Repeat, a button should NOT be programmed
for Mode Select in the MPS software.
Repeat On/Off Button:
To use this feature each channel should have the Option Board Feature box enabled in
the radio programming software. The desired button should be programmed to no function in the radio
programming software. In the MPS software on Button Assignment tab set the desired button to “Store/Retransmit
On or Off”. Pressing and releasing this button will toggle between repeat enable and disable. A medium tone
followed by a high tone indicates the unit is in repeat mode and a medium tone followed by a low tone indicates
the unit is in non-repeat mode.
