4
RADIO PROGRAMMING
Motorola CDM-750, CDM-1250, GM-140, GM-160, GM-328, GM-338, GM-398, PRO-3100, PRO-5100, PRO-
7100 Programming Instructions
It is necessary to program the radio before installing the unit. This is because the
Option Board Feature
of the
radio must be enabled in order to program the unit using the Motorola RIB box and cable or RIB-less cable and to
hear confirmation beeps from the radio after programming the unit.
1. In the Radio Configuration Window under the Option Board Tab, select Advanced Option Interface as the
Option Board Type. Do not check the Option Board Configuration Download box.
2. When programming the “Conventional Personality”, check the
Option Board Feature
box for all channels if
using a button to control repeat enable/disable. If doing repeat on a per channel basis, then check Option
Board Feature only for repeat enabled channels. Additionally the unit should be programmed to Power Up in
Store/Retransmit Mode.
