Service manual for Wash and Dry Combo product
Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
25
－
The bubble spills from the
detergent
Check if the detergent is excessive, if it is the specialized
detergent for the cylinder washing machine.
Dip one scoop of the softener mixed with 1/2 liter of water to the
detergent box II.
Reduce the usage amount of the detergent in the next time's
wash.
The machine stops when the
procedure has not been
finished
Power failure or water cut.
The drainage pump has noise
during the operation when the
water has just been
drained
The inner barrel water of the washing machine has been drained
but there is still a small amount of water in the drainage pump and
pipe. The drainage pump continuously operates and takes in the
air, and at this time there is the noise, which is normal situation.
To stop for some time during
the wash procedure
The washing machine adds water automatically.
Because there is too much bubble in the tube, the washing
machine is cleaning the bubble.
Non-drain or drain exceed the setting time (E11, E20, E21)
non-drain or drain exceed the
setting time (E11, E20, E21)
Check the pump filter.
Refer to page 10
Check the wire connection.
Check the wires for open
cycled.
If the wires are open cycled, replace the harness.
Check the pump.
The resistance of coil should be in
rang
e from 30 to 40 Ω.
Replace the PCBs.
