Service manual for Wash and Dry Combo product
Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
24
－
4.5 Trouble shooting
You can check for a quick solution as following table.
Description
Solution
The washing machine does
not work
Close the washing machine's door.
Water leakage
Correctly connect the inlet water pipe.
The speed of the clothes is
abnormal
Reload and distribute the laundry evenly in the drum.
There is the peculiar smell in
the washing machine
Run a Tub Clean cycle without any clothes.
No water is visible in the
drum
No fault-water is under the visible area.
There is the remaining water
in the softener's box
It’s normal in operation.
The remaining detergent is
left on the clothes
The water-fast component of the non-phosphorus detergent will
be left on the clothes to form the line scale.
Select Rinse&Spin cycle or brush away the fleck with the brush
when the clothes is dried.
The washing machine does
not fill
Open the water tap.
Check the selection of the procedure.
Check the water.
Pressure to see if the water pressure is insufficient.
Put through the feed-water.
Close the washing machine's door.
To check it the inlet water pipe is bent or blocked.
The washing machine fills
and empties at the same
time.
Make sure the end of the drainage pipe to be higher.
Check if the drainage pipe and sewage have been sealed, if they
have been, there will be the poor ventilation to cause the sip hon
age effect.
No drainage of the washing
machine
Check if the drainage pump is blocked.
Check if the drainage pipe is bent or blocked.
Check the height of the drainage nozzle, make sure it is0.6-1
meter from the bottom of the washing machine.
Vibration of the washing
machine
Level the washing machine.
Fasten the footing.
To check if the internal packing for the transportation have all
been removed.
