Page 14
Setting the TIME ON Timer
If the Timer is set to TIME ON, the unit will automatically operate once between the setting of the clock and the last 24 hours.
• To set the TIME ON value, unlock the control panel and proceed to press the TIME ON button.
The TIME ON clock will appear below the normal clock with the hour value flashing
• Use the ARROW buttons to set the correct hour value.
• Press the TIME ON button again to confirm hour setting.
The minute value will flash
• Use the ARROW buttons to set the correct minute value in 10 minute increments.
• Press the TIME ON button again to confirm minute setting.
(Please note if there is no operation for 10 seconds the unit will automatically confirm the clock setting)
Setting the TIME ON & TIME OFF Timer
If a Timer is set to TIME ON & TIME OFF, the unit will automatically operate between the setting TIME ON & TIME OFF clock. If the
TIME OFF clock is set to the same TIME ON clock then the TIME OFF clock will automatically be delayed by 10 minutes.
• To set the TIME ON value, unlock the control panel and proceed to press the TIME ON button.
The TIME ON clock will appear below the normal clock with the hour value flashing
• Use the ARROW buttons to set the correct hour value.
• Press the TIME ON button again to confirm hour setting.
The minute value will flash
• Use the ARROW buttons to set the correct minute value in 10 minute increments.
• Press the TIME ON button again to confirm minute & TIME ON setting.
• To set the TIME OFF value, press the TIME OFF button.
The TIME OFF clock will appear below the normal clock to the right of the TIME ON clock with the hour value flashing
• Use the ARROW buttons to set the correct hour value.
• Press the TIME OFF button again to confirm hour setting.
The minute value will flash
• Use the ARROW buttons to set the correct minute value in 10 minute increments.
• Press the TIME OFF button again to confirm minute setting.
(Please note if there is no operation for 10 seconds the unit will automatically confirm the clock setting)
Note: TIME OFF function is only available when a TIME ON function has been set
Cancelling the Timers (TIME ON / TIME OFF)
• To cancel timers, unlock the control panel and then proceed to press the CANCEL button for 3 seconds.
+
Clear Error Code
• To clear the error code, unlock the control panel and then proceed to press both the TIME ON &
CANCEL buttons at the same time to clear all stored error & protection codes.
The beep will sound one time.
+
Enter Query Mode
Query Mode allows for the checking of the units settings & running parameters
• To enter Query Mode, unlock the control panel and then proceed to press both the CLOCK &
CANCEL buttons at the same time for 1 second.
• Press the UP or DOWN ARROW buttons to scroll through the values.
• To exit Query Mode, press the CANCEL button for 1s.
(Please note if there is no operation for 30 seconds the unit will automatically exit Query Mode)
6.3 Button Combination Functions