Midea HP170 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 24

Midea HP170 Скачать руководство пользователя страница 14

Page 11

①

②

③

④

⑤

⑥

⑦

⑧

⑨

10

11

12

13

14

16

15

17

18

19

1

Ambient temperature outside the operational range of the heat pump:

If the ambient temperature is outside the operating range of the heat pump function, the LA icon will be
displayed on screen

2

Wired controller (reserved function):

If a wired controller is connected to the unit then the Wired Controller icon will be displayed on screen

3

Compressor:

If the compressor is activated, the Compressor icon will be displayed on screen

4

E-heater:

If the heating element is activated, the E-heater icon will be displayed on screen

5

Disinfection:

When the unit is in disinfection mode, the Disinfection icon will be displayed on screen

6

Fill water:

When the unit is first powered on (or after the unit is re-powered and the unit was not operational at the
time the power was turned off) the flashing fill water icon will be displayed on screen indicating to fill tank
before making it operational. Once the tank is full, simply unlock the control panel and press the ON/OFF
button (changing the flashing fill water icon to a solid icon). Pressing the ON/OFF button once again will
turn the icon off.

Note: The fill water icon, will not be displayed when the unit is re-powered and the unit was operation at the time the

power was turned off).

7

High temp:

If the target water temperature exceeds 50

°

C then the High Temp icon will be displayed on screen

8

Alarm:

If the unit is experiencing an error or has gone into protection mode, the flashing Alarm icon will be
displayed on screen along with a series of beeps that will sound 3 times every minute until the protection/
error is resolved or cancelled (by pressing and holding the CANCEL button for 1 second)

6.1 Display Screen

SYSTEM

OPERATION

6

«
...
12
13
14
15
16
...
»

Содержание HP170

























Отзывы:

Нет отзывов