Middle Atlantic Products C3 1-bay, Инструкция

Страница: 10 / 38

DETERMINING FRAME HANGING HEIGHT ON WALL (CONTINUED)
4. Use a tape measure and pencil to mark the top keyhole slot locations (left position shown), in line with
the nearest wall stud (studs must be used per bay as indicated and where applicable) based on 1-, 2-,
or 4-bay models, as shown. (
FIGURE C
)
NOTE : Keyhole slot locations must align with wall studs for proper support.
FIGURE C
Top keyhole slot height marking range (shaded) on 4-bay model.
Top keyhole slot height marking
range (shaded) on 1-bay model.
Top keyhole slot height marking
range (shaded) on 2-bay model.
NOTE : Marking must align with
wall stud (where applicable).
NOTE : Marking must align with
wall stud (where applicable).
NOTE : Marking must align with
wall stud (where applicable).
10”
Max.
(255 mm)
34”
Max
.
(865 mm)
48”
Max
.
(1220 mm)
FIGURE B
NOTE
:
• Consider the ADA requirements of a 34” (865 mm)
maximum height when determining the overall
height of your credenza. ( FIGURE B )
For more information, refer to the ADA Standards for
Accessible Design at:
https://www.ada.gov/2010ADAstandards_index.htm
• Consider power receptacles on the wall and power
requirements when positioning your frame.
Page 10
B
B
B