Middle Atlantic Products C3 1-bay, Инструкция

Страница: 21 / 38

Page 21
INSTALLING LEVER LOCK OPTION INSIDE SLIDE-OUT RACK (CONTINUED)
FIGURE Y
NOTE :
• The Lever Lock plates may be installed on the brackets at different depths. (
FIGURE X
)
• All 4 corners of the Lever Lock plates must be inserted into the brackets at the same depth in order to
function correctly.
• (20x) Lever Lock plate washers (AA) are provided for equipment mounting convenience.
6. Attach the 2” and/or 10” Lever Lock plate (X and Y, respectively) by installing the side without the
clip into the brackets first. Then, install the side with the clip until it clicks into place. ( FIGURE Y )
Side with
clip
Side without
clip
Clip
NOTE : Install securing rivet
(Z) into hole to secure the clip
more permanently, if desired.
NOTE : 10” Lever Lock plate (Y) shown.
FIGURE Z
7. Use (4x) 10-32 x ¾” truss screws with washers (W) to secure the face after panel (AB) to the rack
as shown. ( FIGURE Z )
W AB