Micsig Smart Series, Руководство пользователя

Страница: 264 / 354

250
f)
Frame Type 1 - Start + Address 7 + Read/Write + Ackno Data; if all bits in the frame type match,
trigger on read/write frames in 7-bit addressing mode on the 17th clock edge.
Frame type 1 operation method: Select values after the address/data, click values after the address/data on
the touch screen, and modify them on the pop-up virtual soft keyboard.
g)
Frame type 2 — Start + Address 7 + Read/Write + Ackno Data 1 + Ackno Data 2; trigger
on read/write frames in 7-bit addressing mode on the 26th clock edge if all bits in the frame type match.
The operation method of configuring frame type 2 is the same as frame type 1, and will not be repeated
here.
h)
EEPROM data read - When the read operation which contains 1010xxx control byte of the EEPROM
appears on the bus and the Ack bit is correct, then the read data can be captured. If the captured data and
the set data match the set relationship condition, trigger on the clock edge of Ack bit after the data byte.
After selecting “EEPROM Data Read”, click the relationship by “=” “ >” “<” “ ≠”, and the setting method
is the same as the address field.
i)
10-bit write frame - Trigger on 10-bit write frame on the 26th clock edge if all bits in the pattern match.