I n s t a l l a t i o n a n d u s e r m a n u a l
V e r s i o n : 0 1 / 2 0 2 1
H
E
A
T
P
U
M
P
M
I
C
R
O
W
E
L
L
H
P
operations contradictory to this Installation and user manual
damage and will lead to loss of warranty. To prevent injury or property damage the following
instructions must be followed:
2.1
Electrical safety
The device operates at dangerous electrical current.
Only authorized person with particular electro
Danger of electrical shock.
Do not exceed the required power supply.
Do not turn the device on that shows signs of possible damage such as broken packaging,
or otherwise damaged unit’s chassis or cover, smoke, smell, etc.
It is necessary to use appropriate Residual current circuit breaker (RCD) for connection of the heat
pump to main power supply.
Do not manipulate with the device with wet hands.
Do not clean the device with water.
Before cleaning the device, switch off the circuit breaker of the unit’s power supply.
Installation, service or repair must be performed by qualified technician.
When the device is not intended to be used for a longer time, we
breaker of the unit’s power supply off.
Unit must be installed in vertical position to avoid condensate water to enter electrical part of the
unit.
It is forbidden to install the unit close to devices that may cause electri
such as welding machines, motors or rotors, WIFI/WLAN routers or repeaters.
It is forbidden to alter electrical installation of the device. It is also forbidden to alter any other
part or functionality of the device.
2.2
Usage precautions
Do not cover or block the intake or exhaust opening / ventilator and evaporator covers.
It is forbidden to block or cover the intake or exhaust openings with clothes, towels,
buckets, canoes, trees, etc. Such action would lead to a decrease of
That would result in heat pump inefficiency and underperformance, eventually to heat
pump overeat with subsequent security turning off, malfunction, failure or damage.
Especially during bloom months it is highly advised to keep the evaporat
Do not climb up on or sit on the unit.
Do not place any objects on the top of the unit (e.g. boxes, flower vases, etc.).
Do not spray any flammable substances into the equipment; this might lead to fire.
Do not clean the equipment with aggr
deformations.
When cleaning plastic parts do not use any cleaning agents unsuitable for plastic (household
cleaning agents, solvents, bleaching agents, benzene, diluents, rough cleaning powder, cresol,
chemical agents). Instead, sweep the heat pump cover with a soft cloth or a sponge.
Never throw or insert any objects into any hose or opening.
The cover is made of metal. Do not manipulate with lighted cigarette, cigarette ashes, or any other
kind of fire in vicinity to this part.
Use this device exclusively for the intended purpose, as described in the attached instruction
manual. Do not use parts which are not recommended.
Never block the air opening of the product. Protect the air openings from clogging
Do not drink or use the condensate water drained from the unit. Do not return the water back to
the swimming pool. The water may be contaminated with bacteria.
Children are not allowed to operate, touch or play with the unit.
Children are not allowed to manipulate with packaging, plastic / bubble foil. Risk of suffocation!
Prevent the children from injury or harm caused by any manipulation with the unit, its parts or its
I n s t a l l a t i o n a n d u s e r m a n u a l
H P 1 7 0 0 / H P 2 1 0 0 /
operations contradictory to this Installation and user manual may lead to an injury or property
damage and will lead to loss of warranty. To prevent injury or property damage the following
The device operates at dangerous electrical current.
Only authorized person with particular electro-technical qualification can manipulate with unit.
Danger of electrical shock.
Do not exceed the required power supply.
Do not turn the device on that shows signs of possible damage such as broken packaging,
or otherwise damaged unit’s chassis or cover, smoke, smell, etc.
It is necessary to use appropriate Residual current circuit breaker (RCD) for connection of the heat
pump to main power supply.
Do not manipulate with the device with wet hands.
clean the device with water.
Before cleaning the device, switch off the circuit breaker of the unit’s power supply.
Installation, service or repair must be performed by qualified technician.
When the device is not intended to be used for a longer time, we recommend switching the circuit
breaker of the unit’s power supply off.
Unit must be installed in vertical position to avoid condensate water to enter electrical part of the
It is forbidden to install the unit close to devices that may cause electrical or frequency disturbance
such as welding machines, motors or rotors, WIFI/WLAN routers or repeaters.
It is forbidden to alter electrical installation of the device. It is also forbidden to alter any other
part or functionality of the device.
recautions
Do not cover or block the intake or exhaust opening / ventilator and evaporator covers.
It is forbidden to block or cover the intake or exhaust openings with clothes, towels,
buckets, canoes, trees, etc. Such action would lead to a decrease of needed airflow.
That would result in heat pump inefficiency and underperformance, eventually to heat
pump overeat with subsequent security turning off, malfunction, failure or damage.
Especially during bloom months it is highly advised to keep the evaporator fins clean.
Do not climb up on or sit on the unit.
Do not place any objects on the top of the unit (e.g. boxes, flower vases, etc.).
Do not spray any flammable substances into the equipment; this might lead to fire.
Do not clean the equipment with aggressive cleaning agents, this might lead to damage or
When cleaning plastic parts do not use any cleaning agents unsuitable for plastic (household
cleaning agents, solvents, bleaching agents, benzene, diluents, rough cleaning powder, cresol,
chemical agents). Instead, sweep the heat pump cover with a soft cloth or a sponge.
Never throw or insert any objects into any hose or opening.
The cover is made of metal. Do not manipulate with lighted cigarette, cigarette ashes, or any other
in vicinity to this part.
Use this device exclusively for the intended purpose, as described in the attached instruction
manual. Do not use parts which are not recommended.
Never block the air opening of the product. Protect the air openings from clogging
Do not drink or use the condensate water drained from the unit. Do not return the water back to
the swimming pool. The water may be contaminated with bacteria.
Children are not allowed to operate, touch or play with the unit.
t allowed to manipulate with packaging, plastic / bubble foil. Risk of suffocation!
Prevent the children from injury or harm caused by any manipulation with the unit, its parts or its
0 0 / 2 7 0 0 G r e e n
P a g e
6
/ 4 0
may lead to an injury or property
damage and will lead to loss of warranty. To prevent injury or property damage the following
technical qualification can manipulate with unit.
Do not turn the device on that shows signs of possible damage such as broken packaging, broken
It is necessary to use appropriate Residual current circuit breaker (RCD) for connection of the heat
Before cleaning the device, switch off the circuit breaker of the unit’s power supply.
recommend switching the circuit
Unit must be installed in vertical position to avoid condensate water to enter electrical part of the
cal or frequency disturbance
It is forbidden to alter electrical installation of the device. It is also forbidden to alter any other
Do not cover or block the intake or exhaust opening / ventilator and evaporator covers.
It is forbidden to block or cover the intake or exhaust openings with clothes, towels,
needed airflow.
That would result in heat pump inefficiency and underperformance, eventually to heat
pump overeat with subsequent security turning off, malfunction, failure or damage.
or fins clean.
Do not spray any flammable substances into the equipment; this might lead to fire.
essive cleaning agents, this might lead to damage or
When cleaning plastic parts do not use any cleaning agents unsuitable for plastic (household
cleaning agents, solvents, bleaching agents, benzene, diluents, rough cleaning powder, cresol,
chemical agents). Instead, sweep the heat pump cover with a soft cloth or a sponge.
The cover is made of metal. Do not manipulate with lighted cigarette, cigarette ashes, or any other
Use this device exclusively for the intended purpose, as described in the attached instruction
Never block the air opening of the product. Protect the air openings from clogging by particles.
Do not drink or use the condensate water drained from the unit. Do not return the water back to
t allowed to manipulate with packaging, plastic / bubble foil. Risk of suffocation!
Prevent the children from injury or harm caused by any manipulation with the unit, its parts or its
