H P 2 1 0 0 / 2 7 0 0 G r e e n
P a g e
2 5
/ 4 0
center.
3
）
Trial
a.
The user must “Start the Pump before the Machine, and Turn off the Machine before the
Pump”, or the machine will be damaged.
b.
Before start the heat pump, please check for any leakage of water; and
in the thermostat, and then switch on power supply.
c.
In order to protect the swimming pool heater, the machine is equipped with a time lag starting
function, the fan will run 1 minute earlier than the compressor when starting the m
it will stop running 1 minute later than the compressor when power off the machine.
d.
After the swimming pool heater start up, please kindly checking for any abnormal noise from the
machine.
I n s t a l l a t i o n a n d u s e r m a n u a l
V e r s i o n :
The user must “Start the Pump before the Machine, and Turn off the Machine before the
Pump”, or the machine will be damaged.
Before start the heat pump, please check for any leakage of water; and set suitable temperature
in the thermostat, and then switch on power supply.
In order to protect the swimming pool heater, the machine is equipped with a time lag starting
function, the fan will run 1 minute earlier than the compressor when starting the m
it will stop running 1 minute later than the compressor when power off the machine.
After the swimming pool heater start up, please kindly checking for any abnormal noise from the
I n s t a l l a t i o n a n d u s e r m a n u a l
V e r s i o n : 0 1 / 2 0 2 1
H
E
A
T
P
U
M
P
M
I
C
R
O
W
E
L
L
H
P
The user must “Start the Pump before the Machine, and Turn off the Machine before the
set suitable temperature
In order to protect the swimming pool heater, the machine is equipped with a time lag starting
function, the fan will run 1 minute earlier than the compressor when starting the machine, and
it will stop running 1 minute later than the compressor when power off the machine.
After the swimming pool heater start up, please kindly checking for any abnormal noise from the
