Microwave Data Systems FOUR.9 Series, Руководство пользователя и инструкция по установке, Страница: 89 / 90

IN CASE OF DIFFICULTY...
MDS products are designed for long life and trouble-free operation. However, this equipment, as
with all electronic equipment, may have an occasional component failure. The following
information will assist you in the event that servicing becomes necessary.
TECHNICAL ASSISTANCE
Technical assistance for MDS products is available from our Technical Support Department
during business hours (8:00 A.M.–5:30 P.M. Eastern Time). When calling, please give the
complete model number of the radio, along with a description of the trouble/symptom(s) that you
are experiencing. In many cases, problems can be resolved over the telephone, without the need
for returning the unit to the factory. Please use one of the following means for product assistance:
Phone: 585 241-5510 E-Mail: mailto:TechSupport@microwavedata.com
FAX: 585 242-8369 Web: http://www.microwavedata.com/
FACTORY SERVICE
Component level repair of radio equipment is not recommended in the field. Many components
are installed using surface mount technology, which requires specialized training and equipment
for proper servicing. For this reason, the equipment should be returned to the factory for any PC
board repairs. The factory is best equipped to diagnose, repair and align your radio to its proper
operating specifications.
If return of the equipment is necessary, you will be issued a Service Request Order (SRO)
number and return shipping address. The SRO number will help expedite the repair so that the
equipment can be repaired and returned to you as quickly as possible. Please be sure to include
the SRO number on the outside of the shipping box, and on any correspondence relating to the
repair. No equipment will be accepted for repair without an SRO number.
A statement should accompany the radio describing, in detail, the trouble symptom(s), and a
description of any associated equipment normally connected to the radio. It is also important to
include the name and telephone number of a person in your organization who can be contacted if
additional information is required.
The radio must be properly packed for return to the factory. The original shipping container and
packaging materials should be used whenever possible.
When repairs have been completed, the equipment will be returned to you by the same shipping
method used to send it to the factory. Please specify if you wish to make different shipping
arrangements. To inquire about an in-process repair, you may contact our Product Services
Group at 585-241-5540 (FAX: 585-242-8400), or via e-mail at:
ProductServices@microwavedata.com