manualshive.com logo in svg

Microwave Data Systems FOUR.9 Series, Руководство пользователя и инструкция по установке, Страница: 3 / 90

Поделиться
Скачать
Microwave Data Systems FOUR.9 Series Скачать руководство пользователя страница 3

© 2006 Microwave Data Systems Inc. All Rights Reserved. 

This book and the information contained herein is the proprietary and confidential information of 
Microwave Data Systems Inc. that is provided by Microwave Data Systems

TM

 exclusively for 

evaluating the purchase of Microwave Data Systems Inc. technology and is protected by copyright 
and trade secret laws. 

No part of this document may be disclosed, reproduced, or transmitted in any form or by any means, 
electronic or mechanical, for any purpose without the express written permission of Microwave Data 
Systems Inc. 

For permissions, contact Microwave Data Systems Inc. Marketing Group at 1-585-241-5510 or 

1-585-

242-8369

 (FAX). 

Notice of Disclaimer 

The  information  and  specifications  provided  in  this  document  are  subject  to  change  without  notice.  
Microwave  Data  Systems  Inc.  reserves  the  right  to  make  changes  in  design  or  components  as 
progress in engineering and manufacturing may warrant. 

The Warranty(s)  that  accompany  Microwave  Data  Systems  Inc.,  products  are  set  forth  in  the  sales 
agreement/contract  between  Microwave  Data  Systems  Inc.  and  its  customer.    Please  consult  the 
sales agreement for the terms and conditions of the Warranty(s) proved by Microwave Data Systems 
Inc.    To  obtain  a  copy  of  the  Warranty(s),  contact  your  Microwave  Data  Systems  Inc.  Sales 
Representative at 1-585-241-5510 or 

1-585-242-8369

 (FAX). 

The information provided in this Microwave Data Systems Inc., document is provided “as is” without 
warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties 
of  merchantability,  fitness  for  a  particular  purpose,  or  non-infringement.    Some  jurisdictions  do  not 
allow the exclusion of implied warranties, so the above exclusion may not apply to you. 

In  no  event  shall  Microwave  Data  Systems  Inc.  be  liable  for  any  damages  whatsoever  –  including 
special, indirect, consequential or incidental damages or damages for loss of profits, revenue, use, or 
data  whether  brought  in  contract  or  tort,  arising  out  of  or  connected  with  any  Microwave  Data 
Systems  Inc.,  document  or  the  use,  reliance  upon  or  performance  of  any  material  contained  in  or 
accessed  from  this  Microwave  Data  Systems  Inc.  document.    Microwave  Data  Systems’  license 
agreement  may  be  provided  upon  request.    Additional  Terms  and  Conditions  will  be  finalized  upon 
negotiation or a purchase. 

The above information shall not be constructed to imply any additional warranties for Microwave Data 
Systems  Inc.  equipment  including,  but  not  limited  to,  warranties  of  merchantability  or  fitness  for  an 
intended use. 

Trademark Information 

Software Defined Indoor Unit

TM

 (SDIDU

TM

) is a product and trademark of CarrierComm Inc. 

Java

TM

 is a trademark of Sun Microsystems Inc. 

Windows® is a registered trademark of Microsoft Corporation 

All  other  brand  or  product  names  are  trademarks  or  registered  trademarks  of  their  respective 
companies or organizations. 

Содержание FOUR.9 Series



























































































Отзывы:

Нет отзывов