Microwave Data Systems FOUR.9 Series Скачать руководство пользователя страница 10

Страница: 10 / 90

User Reference and Installation Guide

2-3

MDS

Digital Radio

Series

05-4561A01, Rev. A

Core Access

Network

Indoor Unit

Outdoor

Unit

Outdoor

Unit

Outdoor

Unit

Outdoor
Unit

Figure 2-1. MDS Digital Radio Series

SDIDU

and ODU Architecture

Table 2-1 lists key features that Digital Radio Series technology offers to those involved in the
design, deployment and support of broadband fixed wireless networks.

Table 2-1 Key Benefits and Advantages of MDS Digital Radio Series

Benefits

Advantages to Providers/Customers

Reference

Wireless license-free system (FOUR.9
only):

ISM bands do not require expensive

license band fees or incur licensing delays.

Wireless licensed system (SIX.4 only):

No interference from other services as this
band is licensed to the user.

Wireless connectivity supplements existing
cable (Ethernet).

Fast return on investment.

Lower total cost of total ownership.

Media diversity avoids single points of
failure.

146H 143H

2.2 –

147H 144H

2.4

Easy to install units

Straightforward modular system enables
fast deployment and activation.

Carrier-class reliability.

Fast return on investment.

No monthly leased line fees.

148H 145H

3.5

Complete support of payload capacity with additional wayside channels

Aggregate capacity beyond basic payload:
FOUR.9 Series—34 Mbps, 50 Mbps or
100 Mbps.
SIX.4 Series—16 to 131 Mbps

Increases available bandwidth of network.

Allows customer full use of revenue-
generating payload channel.

149H 146H

2.2–

150H 147H

2.5

Содержание FOUR.9 Series



























































































Результаты поиска

Содержание FOUR.9 Series

Отзывы:

Microwave Data Systems FOUR.9 Series, Руководство пользователя и инструкция по установке, Страница: 10 / 90

Результаты поиска

Содержание FOUR.9 Series

Отзывы: