manualshive.com logo in svg

Microwave Data Systems EL805, Руководство по установке и эксплуатации

Поделиться
Скачать
Microwave Data Systems EL805 Скачать руководство пользователя страница 57

MDS 05-2708A01, Rev.  B

MDS TransNET 900 I&O Guide

49

The Extensions are single radios which serve as bridges between adjacent 
sub-network levels. Extensions will undertake a “remote” personality in one 
timeslot, and a “master” personality in the alternate timeslot and provide 
communications with associated Remotes downstream. Extensions behave 
like two radios with their data ports tied together, first synchronizing with 
their upstream Master during their Remote personality period, and then 
providing synchronization signals to dependent Remotes downstream during 
its Master personality period.

All Remotes synchronize to a corresponding Master. This can be the “real 
master” (the 

MODE M

 unit), or it can be a repeater “Extension” that derives 

synchronization from the “real master”.

Payload polls/packets broadcast from the network Master will be repeated to 
all levels of the network, either directly to Remotes, or through network 
repeaters—the Extensions station. The targeted Remote will respond to the 
poll following the same path back to the Master.

9.3 Configuration Parameters for Store-and Forward 

Services

The installation and configuration of an MDS TransNET 900 network with 
an Extension using SAF is straight-forward with only a few unique 
parameters that need to be considered and set at each unit.

In every network there can be only one Master station. It will serve as the sole 
gateway to the outside world. The following three tables detail the parameters 
that will need to be set on each type of radio in the network. 

• Network Master Radio—

Table 16 on Page 49

• Extension Radio(s)—

Table 17 on Page 50

• Remote Radio(s)—

Table 18 on Page 51

 

Table 16. Configuration Parameters for SAF Services

Network Master Radio  

Parameter

Command

Description

Operating Mode

MODE M

Details page 32

Set the radio to serve as a 
Master

Network Address

ADDR

Details page 27

A number between 1 and 
65,000 that will serve as a 
common network ad-
dress.
All radios in the network 
use the same number.

Содержание EL805















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды