24
MDS TransNET 900 I&O Guide
MDS 05-2708A01, Rev. B
Maximum duration (in minutes) before
time-out alarm. Default is OFF.
Enable or Disable unit’s built-in RTU simula-
tor. Default is OFF. Set RTU address between
zero and 80.
Enable or Disable the radio’s Sleep mode
function.
Unit address used for network-wide diagnos-
tics. (Unique within associated network.)
This unit’s Extended address
Typically, the Master is set to zero (0).
Address of the primary Extended radio unit
(Extension).
Included Extended units in MODE X. (Exten-
sions and Remotes only).
Minimum RSSI level required to preserve syn-
chronization with a non-primary radio.
(Only meaningful when XPRI is not NONE)
Reset zone data statistics
Table 8. Operating Status—Display Only
Command
Description
ADDR
Network address
AMASK
Alarm mask (response)
ASENSE
Current sense of the alarm output.
BAUD
Data communication parameters. Example:
BAUD 9600 8N1
BUFF
Data buffering mode: ON = seamless data,
OFF = fast byte throughput
CODE
Security/encryption operational status.
“NONE” (Inactive), or “ACTIVE”
Table 7. Operational Configuration—Set/Program (Continued)
Command
Description
Содержание EL805
Страница 8: ...vi MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 66: ...58 MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 70: ...G 4 MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 76: ...RXD TXD SYN C PWR...
