MDS 05-2708A01, Rev. B
MDS TransNET 900 I&O Guide
23
Table 6. Network-Wide Diagnostics
Command
Description
Controls operation of diagnostic link function.
Set radio’s operational characteristics for net-
work-wide diagnostics
Table 7. Operational Configuration—Set/Program
Command
Description
Program network address
Alarm response.
Default: FFFF FFFF
Sense of the alarm output on Pin 6 of the
DATA interface connector in the EIA-232
mode.
Default: Alarm present = HI.
Data communication parameters
Select the security/encryption setting in the
radio.
CTS delay in milliseconds.
(A value of 0 returns CTS immediately)
“Hold time” that CTS is present following last
character from DATA port.
Device behavior:
DCE (normal) or CTS Key
Operating mode:
where M = Master, R = Remote
Owner’s message, or alternate message (30
characters maximum)
Owner’s name, or alternate message
(30 characters maximum)
Data port (DATA connector) interface signal-
ing mode: RS232 or RS485
Forward power output in dBm.
Содержание EL805
Страница 8: ...vi MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 66: ...58 MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 70: ...G 4 MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 76: ...RXD TXD SYN C PWR...
