
16
MDS TransNET 900 I&O Guide
MDS 05-2708A01, Rev. B
Invisible
place
holder
Figure 15. Power Connector
(Polarity: Left +, Right –)
The power connector used with the TransNET series is
similar to that used by other MDS products, such as the
MDS 9810 and MDS x710 family. The connectors are
not equal and the use of the other style connector may
provide unreliable connections and a spark may be cre-
ated.
Only the power connector, show in
with screw
terminals and two retainer screws should be used with
the MDS TransNET 900.
5. Set the radio’s basic configuration with a PC terminal connected to the
DIAG
(nostics) connector via an RJ-11 to DB-9 adapter cable, MDS
P/N 03-3246A01. (A cable of this type may be constructed using the
information shown in
.) For more information on
connecting a PC terminal and preparing it for use, refer to Section
The three essential settings for the TransNET Transceiver are as follows:
Mode—Master, Remote, or Extension
Network Address—a unique number from 1–65000
Data Interface Parameters—bps, data bits, parity, stop bits
a.
Set the Mode using the
MODE M
(Master),
MODE R
(Remote), or
MODE X
(Extension) command. (Note: There can be only one master
radio in a system.)
If any
MODE X
radios are used in the network, SAF must be turned
on at the Master station. The
MODE X
radio must be programmed
with an Extended Address (
XADDR
). Units that need to hear the
MODE X
radio must be programmed with an appropriate
XPRI
and/or
XMAP
“Simple Extended SAF Network” on page 47
for
more information.)
b.
Set a unique Network Address (1–65000) using
ADDR
command.
Each radio in the system must have the same network address. Tip:
Use the last four digits of the master’s serial number to help avoid
conflicts with other users.
Wire Ports (2)
Lead
Screws (2)
Binding
CAUTION
POSSIBLE
EQUIPMENT
DAMAGE
Содержание EL805
Страница 8: ...vi MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 66: ...58 MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 70: ...G 4 MDS TransNET 900 I O Guide MDS 05 2708A01 Rev B RXD TXD SYN C PWR...
Страница 76: ...RXD TXD SYN C PWR...