MICROTRONIX DX-2200-SW-02 Скачать руководство пользователя

Страница: 11 / 87

DX-2200

– Dual-view 2x1 SDI Video Switcher

Page 11 of 87

The Text Overlay (On Screen Display) is supported in all Display Modes for

progressive video formats only. The Text Overlay is always the top layer in the

output video mix.

The Frame Counter capability is supported in all Display Modes for progressive

video formats only.

The Zoom capability is supported in all Display Modes. Either input can be

zoomed. Except in Display Mode 4 (Split Screen), the zoom can be configured

either as zoom percentage and center position, or as top left corner and size. In

Display Mode 4, only the zoom factor can be set and the zoom position cannot be

changed.

Display Mode 1: Full-screen 2x1 Switcher

In the Full-screen Switcher mode, the selected input is displayed full screen and

the unit can switch from one input to the other.

Display Mode 2: Picture-in-Picture

In Picture-in-Picture (PiP) mode, the selected input is displayed full and the other

input is displayed as a picture in picture with configurable size, position and

transparency (alpha blending). Using either the toggle switch or serial commands,

the DX-2200 can switch between the inputs selected for display full screen and for

the PiP.

Display Mode 3: Dual view, Picture-and-Picture

In the Picture-and-Picture (PAP) mode, the images are scaled to display both

sources side by side. The selected input is displayed on the left side of the screen,

and the other input is displayed on the right.

Using either the toggle switch or serial commands, the DX-2200 can switch inputs

to interchange the left and right side images.

Display Mode 4: Split Screen

In the Split Screen mode, half of each input image is displayed. The left half of the

selected input is displayed on the left side of the output video, and the right half of

the other input is displayed on the right side of the output video.

Using either the toggle switch or serial commands, the DX-2200 can switch inputs

to interchange the left and right side images.

Display Mode 5: Alpha Blended Overlay

In the Alpha Blended Overlay mode, both images are displayed with configurable

alpha blending of the images. The selected input is displayed over a black

background, with the non-selected layer mixed on top of it. The alpha of each

input can be adjusted and the two images can be zoomed, moved, and re-sized in

the output video.

Содержание DX-2200-SW-02
























































































Результаты поиска

Содержание DX-2200-SW-02

Отзывы:

Похожие инструкции для DX-2200-SW-02

Бренды по названию

Популярные бренды

MICROTRONIX DX-2200-SW-02, Руководство пользователя

Результаты поиска

Содержание DX-2200-SW-02

Отзывы:

Похожие инструкции для DX-2200-SW-02

Бренды по названию

Популярные бренды