MICROTRONIX DX-2200-SW-02 Скачать руководство пользователя | Manualshive

Страница: 2 / 87

background image

Page 2 of 87

This User Manual provides basic information about using the Microtronix

DX-2200

Dual-view 2x1 SDI Video Switcher

, (Model PN: DX-2200-SW-02). The following

table shows the document revision history.

Date

Rev. Description

Jan. 10, 2012 1.00 Initial release

Nov. 12, 2012 1.01 Added Digital zoom feature.

Jan. 09, 2013 1.02

Added commands to show or hide a text string (this is in addition to the existing
command to toggle visibility).

Feb. 14, 2013 2.00

Revised Serial Command structure.
Added 1080i and 1080p video resolutions.

March 1, 2013 2.10

Added NTSC and PAL resolutions.
Added text background & overlay transparency.
Added ‘O’ commands for output mode control.
Serial control mode changed to always be active.

March 12,

2013

2.20

Added new commands to configure the control DIP & Toggle switches and changed
the default DIP switch settings.
Removed the ML command.
Added font size 003 & 004. Add text field reset commands.
Strings in RS232 commands must now be enclosed in quotations.
Fixed a bug with I1, I2 commands in Overlay mode.
Added preset PiP sizes and control of x, y gap.
Increased number of text fields to 12.
Changes to RS232 input to support comment lines and ignore leading white spaces.

May 17, 2013 2.30 Add Mode 7

– two images vertically stacked

June 27, 2013 2.31 Added new section & Table 9: Low Level Text Control Commands & Codes

Aug 14, 2013 2.41

Added new commands for a frame number counter text overlay.
Added a three

digit ‘Annn’ command to control transparency with greater resolution.

Aug 26, 2013 2.50

Added alpha blending transition effect in Alpha Blended Overlay Mode. (Table 6)
Added additional Frame Counter modes of operation.

Aug 30, 2013 2.51

Added vertical and horizontal split screen in Alpha Blended Overlay Mode.
Changed transition commands from T

to TP…

Added programmable size/position for the primary and secondary layers in Alpha
Blended Overlay Mode

Sep 17, 2013 3.00

Added zoom control commands for center position and window selection.
Changed zoom to be controlled for selected/non-selected input instead of by input
connector number.
Added alpha blending effects for secondary layer.
Changed second alpha set by TPB / TSB commands to apply to both transition
effects and split screen modes.
For Mode 5, changed ‘I1’,’I2’,’IT’ to switch inputs and ‘T’ to apply inverse alpha for
visibility reversal of the two inputs.
Added support for setting size in Alpha Blended mode in percent.

Nov 28, 2013 3.01

Fix a problem causing improper configuration or no video output when the unit
powers up with a saved configuration and the video inputs have been connected
before power up.
Add S0, S1, ST commands.

Document
Revision History

«
1
2
3
4
...
»

Содержание DX-2200-SW-02
























































































Отзывы:

Нет отзывов

Похожие инструкции для DX-2200-SW-02

Бренд: La Toulousaine Страницы: 6

Бренд: PRO SIGNAL Страницы: 5

Бренд: Techroutes Страницы: 22

Бренд: Extron electronics Страницы: 2

A99-BAI-ACSF-UGKIT

Бренд: Westell Страницы: 3

Бренд: Indu-Sol Страницы: 9

SecureStack C3K-2XFP IOM

Бренд: Enterasys Страницы: 72

Бренд: 3onedata Страницы: 4

Бренд: CableTronix Страницы: 4

Бренд: NETGEAR Страницы: 8

Бренд: SMART-AVI Страницы: 9

Бренд: Konig Страницы: 52

Бренд: Kramer Страницы: 2

Бренд: Cambium Networks Страницы: 29

Бренд: Gembird Страницы: 2

NetDirector B064-016-02-IPH

Бренд: Eaton Страницы: 12

Бренд: Eaton Страницы: 3

Бренд: Johansson Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды