Microtronics 305001, Руководство пользователя

Страница: 40 / 127

7.3 Storage
The following storage conditions must be observed:
myDatalog2Ex Storage temperature -20...+70°C
Humidity 15...90% rH non-condensing
BP457A battery Operating temperature -10...+40°C
Storage temperature 0...+30°C
AP424DA rechargeable battery Operating temperature -10...+40°C
Charging temperature 0 ...+40°C
Storage temperature 0...+30°C
Humidity 15...90%rH
Note: The table above contains only the storage conditions for the two energy sources used most frequently for the
myDatalog2Ex . Please consult the appropriate factsheet for information about the storage conditions of other
rechargeable battery or battery packs.
Important note: The storage conditions listed in the table only apply when the myDatalog2Ex
is disconnected from the rechargeable battery or battery pack. If the device has not been
disconnected from the rechargeable battery or battery pack, the same conditions apply for
storage as for operation.
Store the measurement technology so that it is protected against corrosive or organic solvent
vapours, radioactive emissions as well as strong electromagnetic radiation.
7.4 Transport
Protect the myDatalog2Ex against heavy shocks, bumps, impacts or vibrations. The original
packaging must always be used for transport.
7.5 Return
Every return must be accompanied by a fully field-out return form. This return form is available in
the service area of the myDatanet-Server. An RMA number is mandatory for any returns and can be
obtained from the Support & Service Centre (see "Contact information" on page 127). The return
shipment of the myDatalog2Ex must occur in the original packaging and with freight and insurance
paid to Microtronics Engineering GmbH (see "Contact information" on page 127). Insufficiently
cleared return shipments will otherwise not be accepted!
40 Rev. 02