background image

 
 

3B SCIENTIFIC® PHYSICS

 

 

 
 
 
 

3B Netlog™ with Ethernet port  

1000541 (115 V, 50/60 Hz) 
1000009 (230 V, 50/60 Hz)

 

 

Instruction manual  

14/06 MEC 

 

 
 
 

1. Safety instructions  

To guarantee the safe functioning of the 
3B NET

log

™ equipment, it is necessary to 

abide by the following instructions:  

 

Do not connect the 3B NET

log

™ device to 

a voltage in excess of ±20V or current in 
excess of ±2A.  

 

Make sure the 3B NET

log

™ device does 

not come into contact with water.  

 

The 3B NET

log

™ device should not be 

exposed to temperatures above 80°C. 

The operating voltage input is protected 
against polarity reversal. However, it is not 
protected against excess voltage.  

 

Do not apply voltage in excess of 4.5V to 
the operating voltage input.  

Use of the Ethernet port requires a power sup-
ply of higher power rating. 

 

When using the 3B NET

log

™ unit with the 

Ethernet port, supply power by means of a 
plug-in power supply. 

 
 

2. Scope of delivery  

1 3B 

NET

log

™ device 

Power supply unit (4.5V DC, 300mA)  

USB cable  

1 Installation 

CD 

 

 
 

Содержание 3B Netlog 1000009













Отзывы: